How should the electronic jacquard machine deal with common faults?
1. Detection of damaged CIEL board
When a certain CEL board fails, the Jc5 display will show the LXX CXX EXX code, and a certain electromagnet of a certain row of a certain board has a gap, but the position of a certain board is often wrong in actual operation. At this time, it is necessary to find out the actually damaged CIEL board with the test cable that comes with it.
2. How to deal with jumps in a large number of warp yarns
During the operation of the electronic jacquard machine, there will be a large number of warps that cannot be woven according to the normal organization. The following aspects can be considered during the maintenance process: one is the wear of the connecting rod bearing and the arm bearing, which causes the broach position to be too low; The bearing is worn, causing the position of the lifting arm to be too low; third, the jacquard machine loses its level seriously, causing the position of the broach to change. Sometimes long-term parking will cause a large number of yarn skipping, which is mainly caused by the aging and wear of the components.
The maintenance, daily cleaning and lubrication of electronic jacquard machines are very important. At the same time, it is necessary to allocate full-time personnel to maintain equipment status, calibrate key components and complete the machine. This can not only reduce the consumption of machine parts and reduce costs, but also effectively improve the efficiency of the loom and product quality.
China Hangzhou Tianmai mechanical jacquard is one of the leading Electronic jacquard attachment, Jacquard spare parts, mechanical jacquard manufacturers and suppliers in China, also supporting customized service. Be free to wholesale high quality products from our factory.