Jacquard machine is a device widely used in today's society. During the use of the equipment, the jacquard accessories will inevitably have some failures. This requires people to understand the cause of the failure and understand the solutions to the failure to ensure The equipment can be used normally, and the equipment can have a longer service life.
1. Board parts rise
When the jacquard accessory is in use, it rises. After checking, it is found that it is not caused by an operating error, so the solenoid valve needs to be replaced. It is also necessary to check the front and back of the moving hook to see if there is any wear.
2. the board parts sink
If the jacquard accessory has a local sinking situation, you need to check the movement structure of the original to see if the solenoid valve has grease or dirt that affects its use. If the contact surface of the solenoid valve is worn out, you must Replace the solenoid valve.
3. Permanent rise and sink
If the jacquard accessories appear to rise and sink permanently, check the solenoid valve and the moving hook to see if there is a short circuit or open circuit in the solenoid, and to see if the moving hook is easy to wear.
When people use the jacquard machine, if you want the equipment to achieve a good use effect and have a longer service life, then you must know the solution to the failure of the jacquard accessory.